(1) Bag filter can rotate n*12 degrees (n is an integer) in the horizontal plane at the outlet of the net gas in order to arrange the pipeline in the field space when the size of the base of the filter is not real according to the actual installation needs.
(2) Lifting method. When hoisting, the whole machine can be hoisted. The dust collector can also be divided into upper box (including air bag and petals and control distributor), middle box (including maintenance door), lower box, air shutter and low pressure air pump. Attention should be paid to the vertical state of the dust collector when installing.
(3) On-site installation procedures:
A. Place the lower box (conical body with supporting legs) in place, find the upper surface of the lower box level, and make the foot bolts better.
B. Put the middle box in place and connect with the lower box with bolts (pay attention to adding rubber gasket between the middle box and the lower box).
C. Lift the upper box according to the direction of the outlet of the clean air, add rubber gasket between the middle box and the flange of the upper box, and connect the two boxes tightly with bolts.